Semi-automatic Flute Laminator
1. Specifications:
| Model |
SJ-B1300B |
SJ-B1450B |
SJ-B1650B |
| Max.Paper Size(mm) |
1300*1300 |
1450*1400 |
1650*1400 |
| Min. Paper Size(mm) |
400*400 |
400*400 |
450*400 |
| Thickness of Face Paper(g/m2) |
150-400 |
150-400 |
150-400 |
| Thickness of Bottom Paper(g/m2) |
A/B/C/E/F flute or less than 8 mm |
A/B/C/E/F flute or less than 8 mm |
A/B/C/E/F flute or less than 8 mm |
| Spee(m/min) |
100 |
95 |
90 |
| Laminating Precision(mm) |
±1.5 |
±1.5 |
±1.5 |
| Power(kw) |
10 |
10 |
10 |
| Power Supply |
380v 3p 5w 50hz |
380v 3p 5w 50hz |
380v 3p 5w 50hz |
| Dimension(mm) |
11500*2150*2600 |
11500*2300*2600 |
11500*2450*2600 |
2. Features of the machine:
a) Key Points:
1) With the help of high quality and balance tested roller, the machine is stable and durable
2) Glue saving, averagely 25-35grams glue per square meter.
b) General Introduction:
SJ-B series Semi automatic flute laminator is consists of automatic face paper lifting section, face paper conveying section, bottom paper conveying section, cyclic gluing section Front lay position section Pre pressing shaping section and pressing section. It suits to laminate the printed paper to the corrugated board or cardboard which is thicker than 350gsm, with features of high precision and high speed. It is the ideal laminating machine for all kinds of packaging company domestic and overseas.
c) Features by parts:
1) Face/bottom paper side lay use hand wheel and position display to adjust left and right, which make the paper loading accurately. Limited switch fixed on face paper loading section makes the lifting action precisely.
2) Pressing roller adopts the specialized roller which is used on print machine, it can delivery both thick and thin paper effectively. Anti-curl structure helps to delivery face paper at the same time.
3) Bottom paper feeding section adopt vacuum sucking belt with high strength and high friction allowing the non-stop feeding. Paper supporter equipped on this section makes it possible to feed the long size sheet.
4) Knurled roller on the bottom feeding part makes sure the stable running when the machine in a high speed.
5) Gluing system has liquid level detect needle, glue will be supplied accordingly and recycled to save glue cost.
6) The gluing system in this machine is a combination of anilox steel roller and rubber glue even roller, in which the rubber roller is crowned design and differential speed gluing method is applied to make a even glue and increase the gluing quality. Averagely 25-35grams glue per square meter, reducing the cost and improving the laminated paper board quality.
7) Both bottom paper and face paper adopt spring front lay so that there is no need to readjust for big or small paper. The intelligent control system makes it possible to adjust the face paper position automatically when the machine is running. The digital display of front lay part can make the front lay adjustment range to 0.1mm.
8) Photoelectric detector helps the conveying of top and bottom paper accurately.Grooved steel positioning roller has long service life and easy to clean.
9) Double pre-pressing roller are equipped on the laminating unit.
10) Automatic damp system is applied on the bottom sheet feeding system to prevent the curving of the laminated sheet.
11) Pressing conveyor makes it possible to adjust the pressure according to the paper board thickness.
12) All the electrical components are imported brand-safe and reliable. Many control knobs are equipped on the machine to allow the operator control the machine in different position; machine speed is controlled by the frequency converter which makes the machine run stably.
13) Machine is driven by imported timing belt and wheel gear with high efficiency, low noise and stable running status.
14) Stainless steel is applied on the corrosive part of the machine, it can prevent the corrosion from the glue.
3. Configurations:
| NO. |
Name |
Brand |
Quantity |
| 1 |
Touch screen |
Siemens |
1 piece |
| 3 |
Servo motor |
Dorna |
1sets |
| 4 |
Frequency converter |
Delta |
5 sets |
| 5 |
Main motor |
China |
2 sets |
| 6 |
Lifting motor |
China |
2 sets |
| 7 |
Conveyor motor |
China |
2 sets |
| 8 |
Clutch/Brake |
China |
1 set |
| 9 |
Chain |
Renold |
30 meters |
| 10 |
Timing belt |
Gates |
14 pieces |
| 14 |
Sucking belt |
NITTA |
10 pieces |
| 15 |
Conveying belt |
SEIGLING |
8 pieces |
| 16 |
Fan |
CHINA |
2 sets |
Audited Supplier 
){kind=link}
){kind=link}